Description
Looking for a way to easily mount light to medium items to drywall, plaster, wallboard, gypsum board and hollow walls? Look no further than the CONFAST Toggle Bolt and Wing Nut Assortment Kit! This kit comes with 3 sizes of toggle bolts - 1/8" x 2", 3/16" x 3", and 1/4" x 3" - as well as corresponding wing nuts. Uses include hanging small pictures, paintings, mirrors, clocks, picture frames, towel racks, and lights. The toggle bolt is unique in that it features a spring wing nut, which can be folded into the drill hole and automatically spring open to provide support. This makes installation a breeze - simply drill a hole (big enough to thread through collapsed spring-loaded wings), push the toggle bolt with wing through the hole, and release the wings. They will automatically spring open and provide support.
- 3 Sizes include 1/8" x 2" (12 count), 3/16" x 3" (8 count), and 1/4" x 3" (4 count)
- Great for mounting light to medium items to drywall, plaster, wallboard, gypsum board and hollow walls, such as painting, mirror, shelves, curtain rods, pictures, and flower pots
- Toggle Bolt with spring wing nut, which can be folded into the drill hole and automatically springS open to provide support.
- Installation - First, you need to drill a hole (big enough to thread through collapsed spring-loaded wings) and then push the toggle bolt with wing through the hole. At this time, the wings would release and clamp onto the inside wall, then pull the bolt back down tight, please note that you should leave enough room for wings to release.
- 1/8" toggle with wing requires a 3/8" drill bit and approximately 1-1/2" clearance for the wing to expand 3/16" toggle with wing requires a 1/2" drill bit and approximately 1-7/8" clearance for the wing to expand 1/4" toggle with wing requires a 5/8" drill bit and approximately 2-1/8" clearance for the wing to expand
