Sammys® 3/8" Vertical Rod Anchor for Steel, 3/8"-16 Rod Size, 1/4"-14 x 3" Screw Size - DST 30 - 8044957
- Teks Drill Point technology delivers one step installation process
- No predrilling required
- Reduces installation time and cost
- Threaded rod attachment
- Allows specifiers and designers to engineer systems with fewer attachment points
- Holds from 446-3125 lbs.
- Installs with SAMMYS Nut Driver
- Ensures correct installation torque
- Reduces occurrences of fastener failure due to over driving
Warranty requires the use of the appropriate nut driver for installations.
Products specifications
| Product Name |
Sammys® |
| Rod Size |
3/8"-16 |
| Substrate |
Steel |
| Mount Style |
Vertical |
| Substrate Fastener Size |
1/4"-14 x 3" |
| Ultimate Pullout |
446 lb (20 ga.), 970 lb (16 ga.) |
| Type |
Rod Anchor |
| Product Family |
Sammys® Steel 3/8 Rod |
| Anchor Diameter |
1/4 " |
| Material |
Steel |
| Finish |
Climaseal®, Electro-Zinc |
| Head |
5/8" AF End-Drilled |
| Drive |
Sammys® #14 (Black) Nut Driver (8113910) |
| Grade |
C1022 screw, C1010 cap |
| Minimum Thickness |
.036"- 1/32" |
| Maximum Thickness |
3/16 " |
| Recommended Installation Tool |
SAMMYS® #14 (BLACK) NUT DRIVER (8113910) |
Installation
1. Insert the appropriate nut driver into a 3/8" or 1/2" portable drill.
2. Insert the Sammys® into the #14 (black) nut driver (p/n 8113910). Drill should be in a vertical position.
3. Push the face of the nut driver tight to the member. Begin installation when the nut driver spins freely on the Sammys®, stop drill and remove.
4. The Sammys® is now ready to receive 1/4", 3/8", 1/2" or metric all thread rod, bolt stock (The 1/2" requires the #14SW (red) nut driver).
Sammy catalog 
